Carbon fiber is among the most well-known composite materials that are used for replacing woods, metals and other plastics that are weak. The carbon fiber reinforced polymer is extremely light and sturdy with comparable strength in tensile. Like every other manufacturing material, there are the right and wrong ways to work using carbon fiber.

If you are a seasoned fabricator, the majority of the information you'll find in this article is likely already well-known to you. These four suggestions are particularly essential if you're brand new to carbon fiber. Learning how to use carbon fiber is as crucial as designing the parts you're hoping to construct.

1. Handle with Care

The composite parts manufacturing are quite sturdy and long-lasting. They could be damaged when handled improperly. It is recommended that customers take care of their products. Carbon fiber fabric, for example, should be kept in its original packaging until utilized. You can use a portion of the fabric however, not all.

This is the way to ensure that the material remains in good condition. If you allow it to become dirty, fabrication will become more difficult. The chance of loose fibers flying about is eliminated by keeping fabric and panels dry in their packaging. Limit loose fibers at a minimum.

2. Practice Proper Storage Techniques

Carbon fiber materials must be kept in a specific manner. It is important to avoid drying dry materials under direct sun. Storage areas that are cool and dark are the best choice for dry items. If you are working with prepregs, it is important that you follow the storage instructions that are printed on the package.

Prepregs are carbon fibre fabrics that have been pretreated with epoxy resin before they leave the factory. They must be stored in a cool environment to ensure the longest shelf life. Additionally, they shouldn't be removed from cold storage until you are actually ready to begin a manual layup. If they sit around and warm up, the resin will begin to be activated.

3. Protection Equipment to be used for personal purposes

Protective gear for personal use is crucial when making or laying carbon fiber materials. The task you are doing will determine the equipment you need. If you are performing a layup by hand for example, you will need eye protection and Nitrile gloves at the very least. We suggest a mask as well. Always make sure your work space is air-conditioned so that you are not overwhelmed by the fumes.

Cutting or machining carbon fiber components requires protective eyewear, sturdy gloves for work, as well as a mask. If you want to prevent fibers that are loose from entering your clothing, don't forget to wear an apron or smock , too.

4. Clean up after

You'll need to clean yourself up after handling carbon fiber parts manufacturing. Do not simply scrub fibers off your skin and dusting them off, since this can result in tiny pieces of the fibers becoming embedded in your skin. Warm water and soap are better choices to clean the debris.

If you accidentally get the substance on your skin don't try to peel it off. Instead, use a cloth or cotton switch to soak the area in vinegar. The vinegar will soften resin and allow it to be easier to remove. Acetate is also effective.

You are able to ask any member of our team when you purchase any questions about safe handling of carbon fiber products. All your carbon fiber-related concerns can be answered by our staff.